SVH Series high-temperature industrial borescope
Portable high-temperature industrial borescope, which supports replacement batteries, two-way mechanical orientation, Wi-Fi viewing and a maximum of 300° C probe mix.
Two-way mechanical direction.
(c) The shaker controls the orientation of the head and the probe rotates at 360° axis, allowing for the internal bending.Clear live imaging
Φ7.5 mm, 1 million pixel ex-vision camera, 120° visual field corner, 10-80 mm depth.Moable Light
Standard configuration 6 LEDs, with fibre-optic lighting to adapt to complex conditions.Product overview
Portable testing for hot space
The SVH series is oriented towards internal detection in high temperature and narrow space.Portable mainframe integration with 4.5 inch display screens, phototapes, replacement of lithium batteries with Wi-Fi, and simultaneous viewing of images on mobile phones or tablets.
The standard configuration uses Φ7.5 mm, 1 million pixel front-view cameras, 120°, 10-80 mm depth.Mechanical two-way orientation, locomotive 360° axis rotation and multi-layer tungsten wiring insertion tubes, which allow for the bypassing of the internal bending.Optical fibre-optic lighting and pre-end high-temperature configuration of up to 300° C are suitable for complex industrial sites.
- check_circlePortable Host
- check_circleTwo-way mechanical direction.
- check_circleClear live imaging
- check_circleMoable Light
Core functions
Designed for physical testing
The key capabilities that affect the efficiency of on-site testing are centralized in a testing platform.
Portable Host
The whole machine is easy to carry and the weight of the naked machine is less than 1 kg, with a replacement of 3.7 V 4200 mAh lithium batteries.
Two-way mechanical direction.
(c) The shaker controls the orientation of the head and the probe rotates at 360° axis, allowing for the internal bending.
Clear live imaging
Φ7.5 mm, 1 million pixel ex-vision camera, 120° visual field corner, 10-80 mm depth.
Moable Light
Standard configuration 6 LEDs, with fibre-optic lighting to adapt to complex conditions.
Wireless view
Supports Wi-Fi, which can view detection images simultaneously on mobile phones or tablets.
High temperature selection
The front end is optional for high temperature configuration with a maximum working temperature of 300° C.
Field records
4.5 Inches display screens support the photographing video and are stored in SD cards.
Product Gallery
SVH7510CT product appearance
Typical application
Cars and engines
Observe internal surfaces, burning areas and pore state with reduced dismantling.
Aerospace equipment
Enter a narrow internal structure to observe and record visible surface state.
Cast detection
Check for internal cavities, cracks and manufacturing defects.
Electricity and industrial equipment
The suitable probes are identified and used for boilers, plumbing and high temperature equipment inspections.
Defence equipment
Supporting the visual testing of restricted internal structures.
Test Process
Full detection process from entry to judgement
Access to detection area
Redirection of observation
Watch the internal state.
Record the results.
Analysis and review
Technical parameters
Camera diameterΦ7.5 mm
Image Sensor1 million pixels
ViewLook Up
Visual corner120°
Deep10–80 mm
Probe length18 mm
Standard detection line length1 m
OrientationThe pole is mechanically oriented in two directions.
Direction angleGreater than 90°
Axe rotation360°
Insert pipeFour floors of tungsten wire.
Display4.5 inches LCD
Host Size145 × 105 × 45 mm
Naked machine weightLess than 1 kg
Whole weightAbout 5 kg
Battery3.7 V / 4200 mAh, replaceable
Lighting6 LED, optional fibre-optic lighting
Data interfaceUSB 2.0
Wireless connectionWi-Fi
Storage8 GB SD card, highest 32 GB
Protection levelProbes and Mirrors IP67
Host working temperature-10–50°C
Working temperature of the probe-20-3000 degrees C, matching configuration.
Storage temperature-20–60°C
300° C ' s heat-resilient capacity and fibre-optic lighting are part of the selection configuration. Please confirm the length of the detection line, the lighting method and the actual temperature requirements before ordering.
Need help?
Contact us. →Contact industrial inspection expert.
Please provide access, distance detection and working temperature, and we will assist in recommending suitable configurations.